Go to Trinity Forge Home

Trinity Forge Team Position
TFTP-QSVS: Quality Control Supervisor

REV: 02/05/08

Coaches:  VP-Quality & Engineering; QA Manager, Manufacturing Manager

Team member's role and responsibilities:

• Provide expertise and understanding of the "Quality Culture" that must be spread throughout the plant.
• Assure that no bad part is shipped.
• Train and educate personnel under his/her responsibility on all aspects of Quality Control, such as use of measuring tools and theoretical understanding of SPC. 
• To implement QC plans assigned by QA Manager.

Rookie requirements:

• High school graduate or equivalent.
• At least three years of experience in Quality Control and/or Metrology and/or five years of forging background,  including familiarity with SPC concepts, instrumentation and communication ability.
• Thoroughly  familiar with TOP-QCTRL.
• Complete training modules HOTI, COLD, MATH, CHRT, MEAS, TEMP, PRNT, STAT, COIN, PRTC, FSAT, GDTT and FAIN
• Complete visual acuity testing.

Physical activity involved:

• Frequent walking through the shop; prolonged standing.
• Some bending; some lifting of steel forgings with tongs.
• Exposure to heat.

Go to Team Positions (TFTP)  |  Go to Training Modules (TFTM)
Go to Trinity Operating Procedures (TOPs)  |  Go to Trinity Forge Home

See an uncontrolled translation of this page in the language of your choice:

Search this web site or the entire web:

Search WWW Search www.trinityforge.net

Documents are controlled only when viewed on-line in the original English -- printed copies or translations are not controlled documents  

© 2008 Trinity Forge, Inc.,  +1 817-473-1515