TFTM-HMCS: Hammer Crew Safety

Trinity Forge Training Module
TFTM-HMCS: Hammer Crew Safety

REV: 09/20/06

Objective: To instruct the Hammermen and Utility Hammermen on their responsibility for the hammer crew's safety.

Syllabus: Session on Hammer Crew Safety

	Hammermen and Utility Hammermen are responsible for the safety of the hammer crew members when forging parts, changing dies, moving dies, and repairing tooling at the hammers.
	Hammermen and Utility Hammermen must make sure that the members of the hammer crew are working safely at all times.
	They must also make sure that all crew members wear all of their personal protective equipment (PPE).
	They must also make sure that all of the equipment at the hammer is operating in a safe manner.
	If there are any safety violations or safety hazards, they must stop the hammer and report them to the Shop Supervisor.
	They must also instruct all crew members to report any safety violations or safety hazards.
	They should allow only certified forklift drivers to operate the forklifts.
	Hammermen and Utility Hammermen must never allow any f their crew members to work on a hammer or any other kind of equipment that is unsafe.

Completion: Sign off by teacher that the Hammermen and/or Utility Hammermen have been instructed and has a good understanding of the hammer crew member's safety.

Notes:

Go to Team Positions (TFTP) | Go to Training Modules (TFTM)
Go to Trinity Operating Procedures (TOPs) | Go to Trinity Forge Home

See an uncontrolled translation of this page in the language of your choice:

Search this web site or the entire web:

Documents are controlled only when viewed on-line in the original English -- printed copies or translations are not controlled documents

REV: 09/20/06

© 2008 Trinity Forge, Inc., +1 817-473-1515