Go
to Trinity Forge Home
Trinity Forge Training Module
TFTM-PRTC: Control of Non-Conforming Parts
|
|
REV: 2/11/08Taught by: QC Supervisor, QA Manager Objective: To instruct employees designated to the task of identifying non-conforming parts on how to do it and what to do next. Syllabus: One session showing employees the various forging flaws that could be identified by visual inspection and the steps necessary to segregate good parts from bad parts. Three weeks of hands on inspection training under the supervision of the QC Supervisor or Post Forge Supervisor. Completion: Sign off by teacher that employee has been instructed and has a good understanding of how to control good and non-conforming parts. Notes: Employees assigned to inspecting parts are instructed to place those parts that they think are non-conforming on a reject table. QC Supervisor and Post Forge Supervisor upon further inspection determine which parts to scrap and which parts to put on non-conformance area of warehouse. (specifically designated area). |
|
Go to Team Positions
(TFTP) | Go to Training Modules (TFTM) Search this web site or the entire web: Documents are controlled only when viewed on-line in the original English -- printed copies or translations are not controlled documents © 2008 Trinity Forge, Inc., +1 817-473-1515 |